วันศุกร์ที่ 24 สิงหาคม 2012 เวลา 15:50 น.

Cryslove-C2 3D & 2D Laser Crystal Engraving Machine พิเศษ

เป็นลายลักษณ์อักษร  เครื่องจักร เมืองไทย
คะแนน อันนี้
(2 โหวต)
Cryslove-C2 3D & 2D Laser Crystal Engraving Machine Jclaser Cryslove-C2 3D & 2D Laser Crystal Engraving Machine

Cryslove C2 is used for 3D image and 2D pictures crystal sub-surface engraving . Compare with Cryslove B2, it capable to Engrave larger size crystal. Cryslove C2 have a big size work table. so you can put several pieces of crystal on work table to engrave.and the machine will engrave the cyrtal one by one.Just like 5CM*5CM*8CM crytal ,it can put 18 pieces.With this function,one worker can operate several machines.

This Green laser sub-surface engraver adopts latest diode pump laser techology. It has many advantages, such as high engraving speed, big engraving size ,exquisite engraving picture, good stability,more saving energy and no pollution .The machine software developed by our company can make the crystal engraved more beautiful.

1. CRYSLOVE C2 Apart
(1)Main body:Laser emmiter,Power supply box,Work table, wiring electrocircuit and pc
(2)Controlling system:Pc control


2. Technical Specification

Laser sourceLaser diode
Laser mediumNd:YAG
Maximum Laser frequency2500Hz
Max. resolution500DPI
Max. engraving size320mm*270mm*100mm
Wavelength532nm
Measurements970mm*750mm*1300mm
Max. power consumption1200W
Cooling systemAir cooling
Weight150Kg


3. Applications and materials

Craftwork, souvenir, photography for tourism, hotel, gallery.,etc.
Crystal crafts, glass, some kind of polymethyl methacrylate, and other transparent materials.

4:advantage
1.Adopt a special optimizing algorithm to devide the engraving 3D or 2D  figure to small sections. then the machine engrave those sections one by one.using this way, the machine can engraving more big 3D or 2D figure.
2.Cryslove C2 have a big size work table. so you can put several pieces of crystal on work table to engrave.and the machine will engrave the cyrtal one by one.Just like 5CM*5CM*8CM crytal ,it can put 18 pieces.With this function,one worker can operate several machines.

  • ผู้ผลิตเครื่องเลเซอร์: Jing Chuang Laser
  • ชนิดเลเซอร์: Green Laser Diode
  • แม็กซ์ กำลังแสงเลเซอร์: 2.4W
  • แม็กซ์ ขนาดของภาพ: 320*270*100mm
  • ความเร็วในการแกะสลัก (จุด): 5000 points/second
  • ความเร็วในการแกะสลัก (เส้น): 1000mm/second
  • ขนาดระบบ (W × L × H): 970*150*1300MM
  • น้ำหนักของระบบหลัก: 150KG
  • ความต้องการแหล่งจ่ายไฟ: AC220V/100V 50HZ/60HZ
  • แม็กซ์ การใช้พลังงาน: 1200W
ปรับปรุงล่าสุดเมื่อ วันศุกร์ที่ 24 สิงหาคม 2012 เวลา 16:06 น.
เครื่องจักร เมืองไทย

เครื่องจักร เมืองไทย

ผู้เชี่ยวชาญด้านเลเซอร์แห่งประเทศไทย, เครื่องเลเซอร์ การขายการบริการและการสนับสนุน

Email[email protected]

ที่อยู่ : อาคารมณียาเซ็นเตอร์ชั้น 7 โซน A ถนนเพลินจิต 518 / 5 ลุมพินีปทุมวันกรุงเทพฯ 10330 ประเทศไทย

โชว์รูมและศูนย์บริการ : 95/10 ถนนสุขุมวิท 105, บางนา, บางนา, กรุงเทพฯ, ประเทศไทย

เว็บไซต์: www.machinethailand.com

จากล่าสุด เครื่องจักร เมืองไทย

รายการที่เกี่ยวข้อง(จำแนกตามแท็ก)

กลับสู่ด้านบน